|25 × 14 × 5 cm
Materials: carbon steel, ABS and aluminum
Cut grafting twigs supply from 5mm to 1.4cm (5/16″) in diameter
3mm thick trimming blades
Philips screwdriver with red handle
Size 27cm * 10cm/10.5in * 3.9in
2 extra blades
How to use:
Step 1: Hold the grafting material in the graft tool and squeeze the handle to make cutting, repeat this step to cut the stem from the donor plant. Make sure to cut a groove in the plant.
Step 2: Insert the donor stem into the plant’s groove, aligning the cut surfaces as closely as possible. If the stock and donor plant are not the same size, adjust only from the side.
Step 3: Place the sterilizing material around the connector and tie with tape, the sterilizing material protects against bacteria and weather conditions.
Step 4: Use the pruner to cut the useless branches from the plant.
Step 5: Grafting tool with “V & U & Ω” blade and blade tip can cut, one-piece blade can be used as two-piece blade. So you would have a total of six pieces of blade.
Keep out of reach of children and do not use on dry or old hardwoods
1 x Set of Pruning Shears